Tutorials

Installing Microsoft Windows onto DigitalOcean Droplet August 2017 Work

Statement : Associate IP and Droplets with this article completly has been destroyed due to security demand.

Installing Microsoft Windows Operating System to DigitalOcean’s Droplet is impossible using conventional methods due to the inability to mount an installation ISO and lack of a KVM providing a virtual keyboard (ie. Send Ctrl + Alt + Del, etc.).

The guide below will walk you through the entire process, from beginning to end. Once you have reached the end of the guide your server will be successfully running Microsoft Windows Operating System.

Tools You Need

The Guide
  • Log In – Log into your DigitalOceans Control Panel.

  • Create Droplet – Once you have logged in, you will need to choose “Create Droplet”.

  • Choose Image – You have to choose size image based on your demand.

  • Choose Datacenter – In this case, Amsterdam datacenter number 2 is the best choice.

  • Create a hostname for your droplet.

  • Once Complete – Click create droplet.

As you may have noticed there were additional options on the Droplet creation page, please ensure to do NOT choose “Backups” or “User Data” as they may interfere with the installation of Microsoft Windows and cause the installation to fail. You can certainly enable “IPv6” and “Private Networking”, both should work without issue once Microsoft Windows has been installed.
  • Success – Your new droplet now ready.

  • Log In – Check your email, log in to yor droplet using web console or  putty, do not forget to change your ssh password.

  • Recovery ISO & Support Ticket – Once your Droplet has been successfully created a support ticket will need to be created to request DigitialOcean’s Recovery ISO be mounted to your Droplet.

Locate Support Ticket Creation Page – Choose “Support” at the top of DigitalOcean’s control panel webpage.

Support Tickets – Once you are inside DigitalOcean’s “Support Center” scroll down and you need to choose “Contact Support” at the bottom of the page.

Create New Support Ticket – Once you have arrived on the “New Support Ticket” page inside DigitialOcean’s control panel you will need to fill in the page similar to the following screenshot.

Submit Ticket – Once you have completed filling in the Support Ticket Request to be similar to the above screenshot you will need to choose “Submit Ticket” (Blue Button) at the bottom right of the page.

Depending on the time of day it may take several hours for DigitalOcean’s Support Team to respond to your Support Ticket.

Ticket Response – DigitalOcean’s Support Team will eventually respond to your ticket noting the Recovery ISO has been mounted to your Droplet.

  • Power Off & Power On Your Droplet – Once the recovery ISO has been mounted for you by DigitalOcean’s Support Team you will need to power your Droplet off and then power it back on all via their web control panel.

As with powering off, it will take a few moments for your Droplet to power on.
  • Accessing Your Droplet’s Console – DigitalOcean provides console access for all of their Droplets (It provides similar access to have a monitor, keyboard and mouse attached) which will be used to install Microsoft Windows onto your Droplet.

  • A New Browser Windows Opens – Once you have chosen “Console” as detailed above a new browser window will open presenting you with your Droplet’s console.

In the event your console windows doesn’t look nearly identical to the above you will want to respond to your Support Ticket requesting assistance from DigitalOcean’s Support Team in regards to booting your Droplet into the recovery ISO.
  • Access Interactive Shell – Your recovery environment now has network access allowing us to continue with the downloading and installation of Microsoft Windows to your Droplet.Choose “6” on your keyboard to choose option #6 (“Interactive Shell [/bin/bash]”) and then choose “Enter” on your keyboard to run the command.

  • Installing Microsoft Windows – To begin the Windows installation you will need to input the following command into your Droplet’s console. Please ensure the command matches perfectly otherwise your installation will likely fail.
LINK Installation File
Disclaimer : I found this link on online forum, this site does not have any connection to the third party link above. There is 3 links you should pass, You may need enter this password : Xufq2wFs
The Windows template will be downloaded from a WhatUpTime content mirror and installed automatically to your Droplet. The installation may take several hours depending on your Droplet’s connection to the content mirror.

You may need to re-open your Droplet’s console via DigitalOcean’s web control panel as the console automatically disconnects from the Droplet after a period of time when there is no mouse or keyboard input.
  • Installation Complete – The installation of Microsoft Windows onto your Droplet will be complete when your Droplet’s console resembles the below screenshot.

  • Powering Off Your Droplet – Once you have confirmed the installation of the Microsoft Windows template has completed using the information above you will need to power off your Droplet via DigitalOcean’s web control panel.

  • Respond To Your Recovery ISO Support Ticket – When you Droplet has completed powering off you need to respond to your previous recovery ISO ticket requesting DigitalOcean Support Team remove the recovery ISO.

Depending on the time of day it may take several hours for DigitalOcean’s Support Team to respond to your Support Ticket.
  • Recovery ISO Removed – Once DigitalOcean’s Support Team has removed the recovery ISO from your Droplet you will be ready to proceed to the next step.

Power On (Switch On) Your Droplet – Choose “Switch On” for your Droplet allowing your Droplet to begin starting up and booting into Microsoft Windows.

It will take a few minutes for your Droplet to begin booting into Microsoft Windows. Once it begins booting into Microsoft Windows it will take several more minutes before Microsoft Windows is fully booted and you are able to login.
  • Open your Droplets Console – You will need to open the console for your Droplet as the next actions you will need to take will be performed via your Droplet’s console.
  • Confirm Microsoft Windows is Running – Once you have launched your Droplet’s console you should be presented with either Microsoft Windows booted or Microsoft Windows login screen (It will depend on how long it took Microsoft Windows to fully boot).
Depending on the version of Microsoft Windows you chose to install to your Droplet your console may not match the following screenshot perfectly, however it should closely resemble it.

  • Logging into Microsoft Windows – Once you have confirmed your Droplet has completed booting into Microsoft Windows you will be ready to proceed logging into Microsoft Windows using the username & password provided in the link above.
Depending on the version of Microsoft Windows installed onto your Droplet you may find the login form is hidden when you first open your Droplet’s console. In order to reveal the login form you will need to perform the following. – Click inside your Droplet’s console window – Click & hold the left mouse button on your mouse – Swipe toward the top of your console window revealing the login fields

Manually Configure Your Droplet’s IP Address – Unfortunately due to the nature of DigitalOcean’s network configuration you will need to manually configure your assigned IP address(es) inside Microsoft Windows in order for your Droplet to access the internet.

Microsoft’s Guide – https://msdn.microsoft.com/en-us/library/dd163570.aspx

You may locate your Droplet’s Public IP Address, Subnet Mask & Gateway at the very bottom of your Droplet’s console window. In addition to configuring the Public IP Address, Subnet Mask & Gateway you will also need to configure DNS servers. We have provided the following DNS server IP addresses for your convenience, however you may use any DNS servers you desire. Preferred DNS Server: 208.67.220.220 Alternate DNS Server: 8.8.8.8

Click Control Panel and click Network and Internet

Inside Network and Internet click Network and Sharing Center

Inside Network and Sharing Center click Change Adapter Setting

Right click on Ethernet and click properties.

Click Internet Protocol Version 4 (TCP/IPv4)

Configure based on Public IP Address, Subnet Mask & Gateway and DNS Server above

Click OK and your connection will Identifying.

Well Done. 🙂

  • Microsoft Windows Remote Desktop – Once you have completed manually configuring the IP Address(es) for your Droplet you will be able to log into your Droplet directly using Microsoft Remote Desktop.

In the event you unfamiliar with Windows Remote Desktop it is recommended you review Microsoft’s article here on how to use the remote desktop client built into Windows.

Alternatively you may wish to use Windows Remote Desktop Connection Manager, you can download it for free here.

  • Congratulations! You have successfully installed Microsoft Windows to your DigitalOcean’s Droplet and accessed it via Microsoft Windows Remote Desktop!You should consider completing the follow to avoid potential issues in the future.

    1. Change the password for the “Administrator” account, a guide on how to change a password in Microsoft Windows Server 2016 Datacenter Evaluation x64 can be found here.

    2. Install all of the latest updates for Microsoft Windows

    3. Activate Microsoft Windows with your valid, legitimate license key

    4. Expand your C:\ Partition – When you install our Microsoft Windows template it will by default only use ~15GB of your hard drive. Using “Disk Management” inside Microsoft Windows you can expand your C:\ partition to include your entire drive.

    5. Installing missing Microsoft Windows drivers using SDI, you can download it for free here.

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

20 − 6 =

Close